Batch Vacuum Crystallizer

For special cases requiring very low operating temperatures achieved only by very high vacuum, and for those applications involving relatively small amounts of material – or when the material being processed must be handled on a less than a continuous basis – it is often both convenient and economical to use a Swenson batch vacuum crystallizer.

Cycles on batch equipment range from two to eight hours, not including loading and unloading time. At the conclusion of the cycle, the material is deposited in an agitated tank from which it is removed on either a batch or continuous basis for separation and drying. The entire cycle for such equipment may be automated.

Where the material is cooled through a very wide range and/or to a final temperature which requires a very high vacuum, a large ejector or booster is utilized to compress the vapour to a pressure high enough for condensation with available cooling water. In such cases, the batch vacuum crystallizer’s economies of steam usage are approached only by multiple stage continuous equipment of five or more stages.

An added advantage of the batch vacuum type of crystallizer is its capacity for self-cleaning, which is particularly helpful when dealing with materials prone to grow on the walls of continuous crystallization equipment.

Whiting Equipment Canada, Inc. © 2018